
Essential PDI
Entry-level pre-delivery inspection for smaller apartments with documented defects and a professional report.
A professional buyer-side inspection service for apartments, villas and resale properties. We document the condition of your property before you accept possession.
One core inspection product, plus specialised services for premium homes, remote owners and later B2B expansion.

Entry-level pre-delivery inspection for smaller apartments with documented defects and a professional report.

Our flagship apartment inspection with the 120-point core checklist, photographic evidence and builder-facing snag summary.

Expanded scope covering terraces, external walls, boundary, parking, drainage, multiple floors and applicable external infrastructure.

Pre-inspection document collection, on-ground inspection, photos, remote briefing, access/meter documentation and reinspection.

Condition-focused inspection to help buyers understand the property's visible condition before purchase or negotiation.

Follow-up verification after developer rectification to confirm whether reported issues have been addressed.

Common-area and maintenance audits covering clubhouse, lobby, basement, parking, drainage, common services and finishes.

Pre-handover sample-unit audits, snag closure verification, quality trends and handover-readiness support.

When a concern goes beyond routine inspection—structural, high-risk electrical, laboratory or invasive testing—we refer to the appropriate specialist.
The Standard PDI is built around a 120-point checklist with photographic evidence and clear defect classification.


Every inspection follows a repeatable SOP so the report is consistent and useful.
Review available property documents, specifications, floor plan and promised items.
Start with a visual overview to identify obvious condition issues and areas needing attention.
Inspect civil finishes, flooring, doors, windows and visible workmanship systematically.
Check operation, alignment, locks, hinges, glazing and accessible sealants.
Perform safe basic electrical, plumbing, water-flow and drainage observations.
Review fittings, slope, drainage, sanitaryware, counters, sinks and visible services.
Assign defect IDs and classify findings as Major, Moderate, Minor, NA or Observation.
Quality-check the report, brief the customer and provide builder-facing snag information.
We focus on evidence, not exaggerated diagnosis.
Rectify or review before acceptance where appropriate.
Rectify during the snagging cycle.
Cosmetic or lower-impact issue.
Recorded clearly; never assumed as passed.
Monitor or verify where a condition needs attention.
Location + observation + evidence + recommended next step.
Clear package rates by property type. Final quotation can vary with actual area, floors and scope.
The business is designed around trust, evidence, consistency and independence.
We inspect for the buyer and do not sell repair work to the same inspection customer.
A repeatable checklist, defect coding and QA process across inspections.
Photographic evidence supports material findings and customer communication.
Follow-up verification after rectification creates a recurring service opportunity.
A credible inspection brand is clear about what it does—and what it does not certify.
Common questions about pre-delivery inspection, snagging, reports and pricing in Bhubaneswar.
A Property PDI (Pre-Delivery Inspection) is a professional inspection of an apartment, villa or house before the buyer accepts possession. UrbanEstates checks visible construction quality, flooring, doors and windows, electrical points, plumbing, bathrooms, kitchen, balconies and other accessible areas and provides a documented inspection report.
A Pre-Possession Inspection in Bhubaneswar is an inspection conducted before you take possession of your new flat, apartment or villa. It helps identify visible defects and incomplete work so that you can communicate the issues to the builder before accepting the property.
A new property may still have finishing defects, drainage problems, hollow tiles, paint issues, leakage indicators, improperly aligned doors/windows or incomplete handover items. An independent property inspection in Bhubaneswar creates photographic evidence and a structured defect list before possession.
Our apartment inspection covers major accessible areas including:
The Standard PDI is built around a 120-point core checklist.
Yes. UrbanEstates provides flat inspection in Bhubaneswar for new apartments before possession and can also undertake resale-property inspections. The inspection scope is selected according to the property's size, type and requirements.
The 120-point inspection covers documentation/specification comparison, walls and ceilings, flooring and tiles, doors/windows, electrical checks, plumbing, kitchen, bathrooms, balcony/utility, fixtures and handover items, along with photographic evidence.
Yes. Our snagging inspection identifies visible defects and incomplete work that should be addressed during the builder's snagging/rectification process. Defects are classified according to severity and supported with photographs and location details.
A flat handover inspection is performed before or around the possession/handover stage to document the actual condition of the property. UrbanEstates checks the apartment against the available specifications and identifies visible defects, incomplete items and handover-related observations.
Yes. UrbanEstates can provide a pre-purchase property inspection for suitable resale properties. The purpose is to help the buyer understand the visible physical condition of the property before making a purchase decision.
Note: This is a physical-condition inspection and is not a substitute for title, legal or statutory due diligence.
Yes. Our Villa PDI / Villa Inspection has a broader scope than a standard apartment inspection. Depending on accessibility, it can include terraces, external walls, boundary walls, gates, stairs, parking, drainage, tanks/pumps and other external areas.
Yes. Our NRI Property Inspection in Bhubaneswar is designed for owners who cannot personally attend the possession or inspection visit. The service can include document collection, physical inspection, photographs, key/access-card and meter documentation, remote briefing and reinspection.
A home inspection can identify visible issues such as:
The inspection does not claim to identify every hidden or concealed defect.
Yes. Customers receive a professional Property Inspection Report containing the inspection findings, defect summary, severity classification, photographic evidence and inaccessible-items list, along with a builder-facing snag summary where applicable.
UrbanEstates uses a structured classification:
The inspection duration depends on the property size, number of rooms, floors and inspection scope. A typical professional inspection may require 2–4 hours, particularly for larger apartments and villas.
UrbanEstates targets 24–48 hours after the inspection, subject to the inspection scope and workload.
Our current package prices are:
Final pricing can depend on property size, floors, scope and travel. Reinspection is quoted separately after the first visit.
Yes. An Occupancy Certificate does not make an independent physical inspection unnecessary. The purpose of PDI is different: it documents the visible condition of your individual property and identifies defects, finishing issues and incomplete items before acceptance.
However, UrbanEstates does not represent its PDI as a legal verification or certification of the OC, sanctioned plan, title or statutory approvals.
No. Our standard home inspection service is designed for visual/access checks, non-destructive measurements and safe basic functionality checks.
We do not independently certify structural integrity, high-risk electrical systems, destructive waterproofing investigations, laboratory testing, fire/lift statutory compliance or property title/legal rights. Where necessary, we recommend referral to an appropriately qualified specialist.
UrbanEstates is positioned around independent buyer-side inspection, standardised methodology and evidence-based reporting. We inspect for the buyer and do not make repair work part of the core inspection relationship. The objective is simple:
Inspect the property. Document the defects. Give the buyer evidence. Help them make a better possession decision.
Book an independent inspection before you accept possession.